Ensure the water inlet filter is clean and the O-rings on the hoses are not cracked. 2. Setup & Assembly
Connect one end to the water outlet on the unit and the other to the spray gun. rok power washer instructions
For petrol models, check the engine oil level with the dipstick and ensure the fuel tank is filled with fresh, unleaded petrol. Ensure the water inlet filter is clean and
Crucially, . Running the pump dry is the fastest way to destroy its internal seals. Once the water is flowing from the tap, squeeze the trigger on the spray gun for about 30–60 seconds while the power is still OFF . This "primes" the system by purging air pockets that cause the motor to stutter or pulsate. Phase 2: Engaging the Power For petrol models, check the engine oil level
Pull the recoil starter cord briskly; once running, move the choke to the For Electric Models: How to Use a Pressure Washer Step by Step Instructions
Before starting, ensure you have a steady water supply and that your work area is clear of debris. Check the Water Inlet