Galletto 1260 Drivers Windows 10 Fixed !!install!! Here

Revive Dead DJI Batteries Using DJI Battery

Galletto 1260 Drivers Windows 10 Fixed !!install!! Here

ISSUE: Windows 10 automatically installs the latest FTDI drivers which are incompatible with most Galletto 1260 interface clones, resulting in a "Code 10" or "Code 43" error.

Fixing the Gallettto 1260 Driver Nightmare on Windows 10 (Permanent Solution) galletto 1260 drivers windows 10 fixed

After testing over 30 different driver packs and registry hacks, the consistent method to get the Galletto 1260 working on Windows 10 involves three distinct steps: ISSUE: Windows 10 automatically installs the latest FTDI

: It supports reading and writing the flash/EEPROM dump directly through the OBD2 port without needing to disassemble the ECU. Windows 10 "Fixed" Installation Guide galletto 1260 drivers windows 10 fixed

Related Posts

View 11 Comments

11 Comments

  1. galletto 1260 drivers windows 10 fixed
    Henry Ziemba on

    I tried but when I run Battery Killer,
    I get
    FAILED TO CONNECT TO 9999
    HID_SMBUS DEVICE NOT SUPPORTED

    I got my chip and jumpers following your links to Amazon
    Running win 11 fully updated

    Please help! THX

    Reply
  3. galletto 1260 drivers windows 10 fixed
    Steve on

    What version of DJI Battery Killer are you using? My version was compiled 6/26/21 and it looks completely different – and doesn’t have the “Seal” option.

    Reply
  5. galletto 1260 drivers windows 10 fixed
    MArtin on

    Hello there,
    I’m interesting in the same think as Paco is – howto reset cycle count value – is it possible at all?

    Which chips supports your software please?
    Does it support BQ8060?

    Many thanks
    Martin

    Reply
  6. galletto 1260 drivers windows 10 fixed
    juan on

    hi there.
    i wonder why battery for navuc 2 pro has to be disassembled.
    could you explain?
    meny thanks

    Reply
  7. galletto 1260 drivers windows 10 fixed
    Scott on

    Thanks for the share.
    It works on my Mini 2. But, I use BQ9003 instead of BQ30Z55. The first one was revived very soon. The second one is probably too low voltage. I have to wait until a 9v battery charges it a little bit.

    Reply
  8. galletto 1260 drivers windows 10 fixed
    Nun Azev on

    Hi
    At “required material” refers to CP2012; it can make searching on Amazon difficult because it is CP2112.
    Thanks

    Reply
  9. galletto 1260 drivers windows 10 fixed
    miles267 on

    Followed this guide with Mavic 2 (Zoom) battery. Still getting error: Could not perform SMBus read 0x00
    when jumpers and external power supply are connected at 16V 2A(amps). Also there are multiple GND and multiple + terminals on the Mavic 2 battery. I assume there are corresponding pairs for each of the 4 battery cells and how long do you need to keep the external battery supply connected to the Mavic 2 battery?

    I was hoping not to have to cut open the Mavic 2 battery 🙂

    Reply
  11. galletto 1260 drivers windows 10 fixed
    Richard on

    I’m trying to recharge my DJI battery after a long period of not charging it. Do you think the “Dji Battery Killer” app works with the BT60 (12s, 46.2V, 5935mhA) Matrice300 RTK?
    I opened the battery and saw the SDA, SCL, and +/- indicators.
    Sincerely,
    Richard

    Reply
Leave A Reply