Performax+battery+charger+and+maintainer+manual+better

Always unplug the AC power cord from the outlet first, then remove the negative clip followed by the positive clip. cdn.prod.website-files.com Troubleshooting & Safety Flashing Lights:

| LED Pattern | Meaning per Manual | Better User Action | | :--- | :--- | :--- | | No lights on charger | No AC power or blown internal fuse | Check outlet with a lamp. If outlet works, return unit for warranty repair. | | Red light solid, never changes | Battery is deeply sulfated or shorted cell | Try desulfation mode for 6 hours. If no change, test battery with multimeter (voltage <4V = dead cell). | | Green light flashes for >24 hours | Battery won’t reach full charge (shorted cell) or charger is undersized for battery | Disconnect. Test battery with load tester. Replace battery if necessary. | | Clamps spark | Connecting clamps while charger is on | Review manual safety section. Always connect clamps to battery first , then plug in charger. | performax+battery+charger+and+maintainer+manual+better

: Ensure the charger is set to the correct voltage (6V or 12V) matching your battery. Connections : Always unplug the AC power cord from the

Once full, it switches to a "float" or "maintainer" mode, providing just enough current to offset natural discharge. Safety First | | Red light solid, never changes |

Safety Warning (template) Danger — Risk of explosive gases. Keep sparks, flames, and cigarettes away from battery. Always wear eye protection. Do not attempt to charge non-rechargeable batteries. Read full manual before use.