Cisco Packet Tracer Example Files Pkt 【99% Certified】

Below are three robust, fully functional topologies with step-by-step details you can build in Packet Tracer in under 10 minutes.

1. Basic Two PCs + Single Switch (VLAN 1 – Default) Use case : Testing basic connectivity, ARP, ping.

Devices : 2 PCs (PC0, PC1), 1 Switch (2950 or 2960) Connections : Copper Straight-through (PC → Switch)

| Device | Interface | IP Address | Subnet Mask | |--------|-----------|------------|-------------| | PC0 | FastEthernet0 | 192.168.1.1 | 255.255.255.0 | | PC1 | FastEthernet0 | 192.168.1.2 | 255.255.255.0 | Switch config (optional – works out of box): enable configure terminal hostname Switch1 interface vlan 1 ip address 192.168.1.10 255.255.255.0 no shutdown exit cisco packet tracer example files pkt

✅ Test : Open PC0 → Desktop → Command Prompt → ping 192.168.1.2 → Should succeed.

2. Static Routing – Two Routers + Two LANs Use case : Inter-network routing (no dynamic protocols). Topology : PC0 (192.168.1.2/24) --- R0 --- R1 --- PC1 (192.168.2.2/24) .1/30 .2/30

| Device | Interface | IP | Subnet Mask | Gateway | |--------|----------|-----|-------------|---------| | PC0 | NIC | 192.168.1.2 | 255.255.255.0 | 192.168.1.1 | | R0 | G0/0 | 192.168.1.1 | 255.255.255.0 | – | | R0 | S0/0/0 (or G0/1) | 10.0.0.1 | 255.255.255.252 | – | | R1 | S0/0/0 | 10.0.0.2 | 255.255.255.252 | – | | R1 | G0/0 | 192.168.2.1 | 255.255.255.0 | – | | PC1 | NIC | 192.168.2.2 | 255.255.255.0 | 192.168.2.1 | Router R0 config: enable conf t hostname R0 int g0/0 ip addr 192.168.1.1 255.255.255.0 no shut int s0/0/0 ip addr 10.0.0.1 255.255.255.252 no shut exit ip route 192.168.2.0 255.255.255.0 10.0.0.2 Below are three robust, fully functional topologies with

Router R1 config: enable conf t int g0/0 ip addr 192.168.2.1 255.255.255.0 no shut int s0/0/0 ip addr 10.0.0.2 255.255.255.252 no shut exit ip route 192.168.1.0 255.255.255.0 10.0.0.1

✅ Test : ping 192.168.2.2 from PC0 → success.

3. Small Business Network – DHCP + DNS + Web Server Use case : Realistic lab with services. Devices : Devices : 2 PCs (PC0, PC1), 1 Switch

1 Router (as gateway + DHCP server) 1 Switch 3 PCs (Client1, Client2) 1 Server (HTTP + DNS)

Topology: Client1, Client2, Server --- Switch --- Router (DHCP) --- (to ISP simulation if needed)