The EDL point is located on the internal motherboard. You cannot access it without disassembly.

: While keeping the points shorted, connect the phone to your computer using a USB-C cable. Verification Device Manager on Windows; the device should appear under "Ports" as Qualcomm HS-USB QDLoader 9008 Software Alternatives (Non-Hardware)

: Use a heat gun or hairdryer to loosen the adhesive and carefully pry off the back plate with a plastic tool. Remove the Protective Shield

Once in 9008 mode, use or the Vivo authorized flashing tool (requires an account) to flash the full firmware. Do not flash a random “edl firmware” from untrusted sites – use the correct PD code (e.g., I2125 ).

For most users, this means a trip to the service center. For the savvy technician or advanced hobbyist, it means one thing: . But here is the harsh reality: Not all EDL methods are created equal. For the iQOO Z6 Pro, understanding the physical EDL point (test point) is categorically better than relying on software ADB commands or button combinations.

To access the EDL point on the iQOO Z6 Pro: