: Connect the smaller "L-shaped" cable to the drive and the other end to an open SATA port on your motherboard. For a primary boot drive, use the port labeled SATA0 or SATA1 .
Locate the "Unallocated" space (black bar), right-click it, and select . installing a sata hard drive top
With the hardware installed, the side panel can be replaced and the computer plugged back in. However, the job is not yet finished; the software requires configuration. Upon booting the computer, the user should enter the system BIOS or UEFI (usually by pressing F2, F12, or Delete during startup) to verify that the motherboard detects the new drive. If the drive is visible in the BIOS, the hardware installation is a success. The final step occurs within the operating system. If the drive is brand new, it will not appear in the file explorer immediately. The user must access the "Disk Management" utility in Windows (or "Disk Utility" in macOS) to initialize the disk and create a new volume. This process formats the drive, making it ready for use. : Connect the smaller "L-shaped" cable to the