__hot__: Xy-w58cdt9-av7 Manual

Attach the button board to the "Key" header to access the menu. ⚠️ Important Considerations

Usually indicates the panel is getting power but no data signal. Check the LVDS connection. xy-w58cdt9-av7 manual

Connect a power supply to the barrel jack or the dedicated 4-pin power header. Ensure the voltage matches the board's requirements (typically 12V). 2. LVDS Panel Connection Use a compatible 30-pin LVDS cable . Attach the button board to the "Key" header

Notes and disclosures (concise)

| Mode | Name | Description | |------|-----------------------------|-----------------------------------------------------------------------------| | | Delay on Pull-up (On-delay) | Relay activates after set time once trigger is applied. | | P2 | Interval on Pull-up | Relay activates immediately, deactivates after set time. | | P3 | One-shot off | Trigger starts timer, relay turns off after delay (if initially on). | | P4 | Cyclic On First | Relay ON for time T1, OFF for time T2, repeats until stopped. | | P5 | Cyclic Off First | Relay OFF for time T1, ON for time T2, repeats. | | P6 | Triggered pulse (rising) | Short trigger pulse produces a fixed output pulse. | | P7 | Latching with delay | First trigger delays, second trigger resets. | | P8 | Infinite hold | Trigger toggles relay on; timer resets. | | P9 | Countdown + reset | Starts countdown; resetting restarts timer from original set value. | Connect a power supply to the barrel jack